Home > News > Content

Application And Maintenance Of Automobile Radiators

Dec 23, 2016

1, the heat sink should not be used with any acid, base or other corrosive nature of contact.
2, recommend the use of soft water, hard water softening treatment you want to use, avoid radiator plugging and scale.
3, the use of antifreeze, in order to avoid corrosion of radiators, please be sure to use regular factory production and in accordance with the national standard of long-lasting rust-proof antifreeze.
4, in the process of installing the heat sink, please don't damage the tropical (film) and scratches the radiator, to ensure the heat capacity and sealing.
5, when completely drain water inside the radiator, engine block water switch is first turned on, water flows, and then close, to avoid blisters.
6, should feel free to check the water level in daily use, want to stop after cooling water. When water is added, slowly open the tank cover, operators should as far as possible away from the body with water, to prevent burns caused by high pressure steam emitted by water.
7, in winter to prevent ice cores caused rupture, such as parking, long-term parking or indirectly, radiator CAP and drain should be switched, all the water out.
8 effective environment, spare radiator should be ventilation and dry.
9, depending on the actual situation of the user in the 1-3 months to completely clean the radiator core. When cleaning, rinse with clear water along the side back into the wind.
10, the water level should be cleaned once every 3 months or depending on the situation, remove the parts with warm water and non-corrosive detergent.